Call Centre for Lifts is a software solution for the comprehensive management of emergency lift communicators. The software will even allow you to handle alarms and control calls. You get not only a detailed overview of all your calls from the lift, but the option to archive them or export the data e.g. for customer reports preparation.
Product Category: Elevator Systems
2N® LIFT8 CAMERA MODULE
2N® Lift8 Camera Module is a recording device that once linked up to any IP, RS232 or RS485 camera, captures images from the lift cabin or monitored space. This is then saved at set intervals to the microSD memory card located in the camera module. The camera module can be used not only with the 2N® Lift8 system, but also as a standalone unit.
GSM/UMTS GATEWAY FOR LIFTS
2N® EasyGate PRO is a full featured land-line replacement. An analogue GSM/UMTS gateway suited for a lift environment. Connect to it any lift emergency communication system, or use it as an instant replacement of fixed lines via mobile (cellular) solution. In addition, the gateway can make a call for transferring data and SMS messages.
2N® 2WIRE FOR LIFTS
2N® 2Wire for Lifts is a practical converter allowing you to connect any IP device in the lift cabin; Even where there is no Ethernet. Its invaluable benefit is that you don’t need to add new lift cabling. Thanks to 2N® 2Wire you simply connect the required IP devices in the cabin to the existing travelling cable.
2N FLOOR ANNUNCIATOR
2N® Floor Annunciator is a communication device designed to be installed in the lift cabin. Its main function is to inform people of the current floor number whenever the lift stops. Apart from announcing the floors it also advises of the ensuing direction and draws attention to the closing or opening of the doors, as well as other configurable events.
INDUCTION LOOP FOR LIFTS
Emergency lift communication for the hearing-impaired. The 2N®Induction Loop is an inductive loop that delivers audio to the lift-cabin interior, where it transmits the sound to hearing aids with a built-in inductive sensor. The induction loop is an indispensable assistant in resolving emergency communications from inside the lift for hearing aid users.
2N® LIFTIP
The 2N® LiftIP is a unique product on the lift communication systems market. It is using VoIP technology for transmitting call from a lift cabin. Therefore, you can install it anywhere where an IP infrastructure is available. What’s more, installation requires no additional converters or other hardware. The 2N® LiftIP provides high quality transmission of sound and continuous online monitoring.
2N® LIFT1
The 2N® Lift1 communication solution is designed for two-way emergency communication in the lift. Its typical use is in elevators where communication is required between the cabin and the control centre or machine room.
2N® LIFT8
A highly modular lift communication system, where the two-wire bus makes the 2N® Lift8 readily installable in any lift context. This means that when it comes to providing for emergency lift communications you won’t have to trouble with putting in new cabling. 2N® Lift8 meets all the applicable EU standards.