GV-TouchDisplay 133

The GV-TouchDisplay133 is a 13.3-inch touch panel designed for GV-Mobile NVR System. With the touch panel, you can monitor live images and operate NVR surveillance software by simply touching the screen.

GV-GPS Receiver

The GV-GPS Receiver can work with GV-System, GV-DSP LPR, GV-Video Server and GV-Compact DVR to perform GPS vehicle tracking. It comes with three types of models: UART, RS-232, and USB. Each model can only work with appropriate Hardware and Firmware version as described below:

Model	Interface	Baud Rate	Compatible IP Device
GV-GPS UART	UART	9600	GV-Video Server (GV-VS02A)		Firmware Version 1.00 or later
			GV-Video Server (GV-VS04A)
			GV-Video Server (GV-VS14)
			GV-Video Server (GV-VS04H)		Firmware Version 1.04 or later
GV-GPS 232	RS-232 Wires	9600	GV-DSP LPR V2 / V3		Firmware Version 1.06 or later
			GV-Video Server (GV-VS12)		Firmware Version 1.00 or later
			GV-Compact DVR V1		Firmware Version 1.52 or later
			GV-Compact DVR V2	Standard Model (GV-LX4C2)	Firmware Version 1.00 or later
				Anti-Vibration Model (GV-LX4C2V)
	PS/2 Connector	9600		Anti-Vibration ACC Model (GV-LX4C2V)	Firmware Version 1.05 or later
			GV-Compact DVR V3	Anti-Vibration ACC Model (GV-LX4C3V, GV-LX8CV1, GV-LX8CV2)	Firmware Version 1.00 or later
GV-GPS USB	USB Connector	4800	GV-System		Firmware Version 8.3.2 or later

Note: Specifications are subject to change without notice.

GV-Joystick V2

GV-Joystick V2 is a plug-and-play device, used to pan, tilt, zoom and focus a PTZ camera. It can work with GeoVision software and hardware independently, and its compatibility with GV-Keyboard V3 empowers the operation of GV applications as well.

GV-IR Remote Control

GV-Keyboard V3 for GV-Control Center

The GV-Keyboard V3 is designed to program and operate GV-Control Center, and it can also be connected with PTZ cameras directly for PTZ control.

GV-Keyboard V3 for GV-System

The GV-Keyboard V3 is designed to program and operate GV-System / GV-VMS, and it can also be connected with PTZ cameras directly for PTZ control.

GV-IO BOX 16 Ports

The GV-IO Box 16 provides 16 inputs and 16 relay outputs. It supports both DC and AC output voltages, and provides a USB port for PC connection.

GV-IO BOX 8 Ports

The GV-IO Box 8 provides 8 inputs and 8 relay outputs. It supports both DC and AC output voltages, and provides a USB port for PC connection.

GV-IO BOX 4 Ports V1.2

The GV-IO Box 4 provides 4 inputs and 4 relay outputs. It supports both DC and AC output voltages, and provides a USB port for PC connection.

GV-Relay V2

The GV-Relay V2 is designed especially for driving higher voltage output devices, and it is controlled by other GV devices, such as GV-Video Server, GV-Compact DVR, GV-IP Camera, GV-DSP LPR, GV-I/O USB Box and GV-NET/IO Card V3.1.

The GV-Relay V2 provides 4 relay outputs, and each output can be set as normally open (NO) or normally closed (NC) independently as per your requirement.