GV-SNVR0411

The GV-SNVR0411 is an H.264/H.265 linux-embedded Standalone Network Video Recorder which records video files directly to the internal hard drive, supporting up to 4 channels of GV-IP Cameras for network surveillance. GV-SNVR0411 has 4-port built-in PoE (IEEE 802.3af), functioning to carry network and power to IP cameras. Featuring with up to 4K resolution video output, GV-SNVR0411 eliminates the need for a separate PC to view and play back video from the unit. Its USB ports allow you to connect a USB flash drive to import or export system settings, update firmware, save snapshot files and back up video in AVI format.

The GV-Tower VMS System V2 comes with 4 hot-swap drive bays for the storage up to 24 TB. This system has two CPU options: Intel Core i3 and i5. It features the latest upgraded VMS system and 64-bit Microsoft Windows Embedded OS. GV-Tower VMS System V2 supports up to 32 channels of GV-IP devices or third-party IP devices (license required). You can also bring the surveillance on the HDTV with a HDMI cable. It is a towering, affordable, and efficient VMS system that you have ever seen.

GV-Hot Swap VMS System V5 (Rev. C) – 3U, 16 8-Bay

The GV-Hot Swap VMS System V5 features a powerful data storage capacity. It comes with a selection of 4U (20-bay) or 3U (16 / 8-bay) and hot-swappable SATA mobile racks. Depending on HDD size, the GV-Hot Swap VMS System V5 can store up to 120 terabytes of recorded data. Support for hot-swapping makes data storage and management more convenient.
GeoVision Surveillance System empowers the GV-Hot Swap VMS System V5 with a maximum of 64 audio and video channels. Its networking capability makes remote access and control of the system possible. Additionally, its compatibility with other GeoVision accessories can cater to any kind of needs or budgets. By extending the compatibility to the third-party IP devices (license required), GV-VMS software provides a pure IP solution to GV-Hot Swap VMS System V5.

GV‐Hot Swap VMS System V5(Rev. C)-4U,20-Bay

GV-GPS Receiver

The GV-GPS Receiver can work with GV-System, GV-DSP LPR, GV-Video Server and GV-Compact DVR to perform GPS vehicle tracking. It comes with three types of models: UART, RS-232, and USB. Each model can only work with appropriate Hardware and Firmware version as described below:

Model	Interface	Baud Rate	Compatible IP Device
GV-GPS UART	UART	9600	GV-Video Server (GV-VS02A)		Firmware Version 1.00 or later
			GV-Video Server (GV-VS04A)
			GV-Video Server (GV-VS14)
			GV-Video Server (GV-VS04H)		Firmware Version 1.04 or later
GV-GPS 232	RS-232 Wires	9600	GV-DSP LPR V2 / V3		Firmware Version 1.06 or later
			GV-Video Server (GV-VS12)		Firmware Version 1.00 or later
			GV-Compact DVR V1		Firmware Version 1.52 or later
			GV-Compact DVR V2	Standard Model (GV-LX4C2)	Firmware Version 1.00 or later
				Anti-Vibration Model (GV-LX4C2V)
	PS/2 Connector	9600		Anti-Vibration ACC Model (GV-LX4C2V)	Firmware Version 1.05 or later
			GV-Compact DVR V3	Anti-Vibration ACC Model (GV-LX4C3V, GV-LX8CV1, GV-LX8CV2)	Firmware Version 1.00 or later
GV-GPS USB	USB Connector	4800	GV-System		Firmware Version 8.3.2 or later

Note: Specifications are subject to change without notice.

GV-Relay V2

The GV-Relay V2 is designed especially for driving higher voltage output devices, and it is controlled by other GV devices, such as GV-Video Server, GV-Compact DVR, GV-IP Camera, GV-DSP LPR, GV-I/O USB Box and GV-NET/IO Card V3.1.

The GV-Relay V2 provides 4 relay outputs, and each output can be set as normally open (NO) or normally closed (NC) independently as per your requirement.

GV-VR605A DC Voltage Regulator

The GV-VR605A is a voltage regulator designed to be installed in the car and supply power to GV-Video Server and its connected cameras. The GV-VR605A is capable of maintaining a 12V voltage to the GV-Video Server and its connected cameras, providing protection against voltage spikes when you turn on the car ignition. After you turn off the car ignition, the GVVR605A will continue supplying power to the GV-Video Server for 75 seconds during which GV-Video Server will stop recording, remove the hard drive from the system and then turn off automatically. The GV-VR605A features 5 power outputs to power the GV-Video Server and its connected cameras.

GV-PA191 PoE Adapter

The GV-PA191 is a Power over Ethernet (PoE) adapter designed to provide power to the IP device through a single Ethernet cable. Adopting the PoE adapter enables you to mount an IP device anywhere in a building where power outlets are not available.

GV-VS11 (1Ch)

GV-VS11 is a powerful H.264 Video Server with compact size and supports dual streams and multiple applications. It supports 1-channel full D1 real-time video and audio encoding, fully integrated with GV-NVR to form the most powerful IP surveillance solution. It also supports over 50 PTZ models to fulfill various project demands. It can record video to a local USB storage, forming the smallest video recorder. It can also active Tampering Alarm alerts when a tampering event happens to prevent crime events.

GV-VS12 (2Ch)

GV-VS12 is a powerful H.264 Video Server with compact size and supports multiple applications. It supports PoE, and 2-channel full D1 real-time video and audio encoding, fully integrated with GV-NVR to form the most powerful IP surveillance solution. It also supports over 50 PTZ models to fulfill various project demands. It can record video to a local USB storage, forming the smallest video recorder. With GPS and UMTS/3G/3.5G support, it provides GIS solution integrated with GV-GIS. It can also active Tampering Alarm alerts when a tampering event happens to prevent crime events.